Follow

Veeam Agent - Perform a full server restore

  1. Before starting, confirm that you have the BitLocker recovery keys for any encrypted drives.
  2. Shut down the computer if it is running.
  3. If Secure Boot is enabled, you may need to disable it in the physical computer's BIOS or the virtual machine's hypervisor settings.
  4. Boot the computer from the recovery ISO or USB drive.
  5. Wait for the Veeam recovery environment to load, then select Bare Metal Recovery.
  6. Set Backup location to Network storage.
  7. Set Network storage to Veeam Cloud Connect repository.
  8. Enter cloudconnect.onenet.co.nz as the service provider.
  9. Sign in with either the root Cloud Connect account, [Company], and its password, or the computer's subaccount, [Company]\[Company]_Computername, and its password.
  10. Select the required backup. If backup encryption is enabled, enter the encryption password.
  11. Select the restore point you want to use.
  12. Set Restore mode to Entire computer.
  13. Select View automatically detected disk mapping and confirm that the backup disks are mapped to the correct destination disks.
  14. Review the summary, then select Restore.
  15. Monitor the restore until it completes.
  16. Remove the ISO or USB drive, then restart the computer.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk